Door Hinges / October 11, 2018 / Yvette Guerette
If you have a three hinge door you can easily undo a single hinge plate at a time. If you have doors with just two hinges youll need to place a wedge under the door to take the weight off the hinge before you loosen it. 2) Once the plate is removed dip a couple cardboard matches into wood or white glue and put them into the hole. Then tighten the hinge screws and they should hold. 3) If the thought of shoving matches into the holes doesnt work for you use a golf tee or a sliver of wood instead. Cover these with glue and reinstall the hinge. Dont put the screw in the repaired hole yet. Allow the glue to dry then cut off any excess wood and then drill a pilot hole into it.
Removing a door with a two hole hinge is going to require two helpers so you might want to be sure you have a friend their to hold the door for you as you begin unscrewing it. Another choice you are going to have is whether or not that you want a removable pin or a fixed pin. This is going to depend more on your needs. A removable pin is going to make it easy for you to take the door off the hinges without unscrewing the hinge from the door jamb. You can easily begin shopping online and looking at all of the different designs that there are for door hinges you might actually be amazed at the choices.
The new slow-close attachments only need to be added to one hinge per cabinet door unless you have large pantry doors. In such cases it is advisable to install two units per door. They will not work on just any European hinge though. You must have the correct straight-arm hinge brand and model number in order to be able to add the attachment to them. The hydraulic apparatus is sold as a separate piece from the hinge and clips on after the doors have been completely adjusted. To determine if the clip-on accessory is available for your existing hinge brand remove a hinge from your cupboard door and visit your local cupboard manufacturing supply company.