Door Hinges / October 11, 2018 / Yvette Guerette
What do begin to fail are the screws that hold the door hinges on the door and the frame. The stresses and strains of everyday openings begin to loosen the screws. This is particularly true on heavier doors that are either left open a lot or bear lots of traffic. At least twice a year you want to go through your entire home inspecting all the door hinges. If you find an loose screws simply tighten them with a screwdriver. If the screws in the door hinges spin in their place and wont tighten into the wood it means the holes are stripped. When this happens do the following: 1) Remove the screws on that particular hinge.
Removing a door with a two hole hinge is going to require two helpers so you might want to be sure you have a friend their to hold the door for you as you begin unscrewing it. Another choice you are going to have is whether or not that you want a removable pin or a fixed pin. This is going to depend more on your needs. A removable pin is going to make it easy for you to take the door off the hinges without unscrewing the hinge from the door jamb. You can easily begin shopping online and looking at all of the different designs that there are for door hinges you might actually be amazed at the choices.
Alternatively if you can identify the brand name and model number of your hinge you can contact the manufacture directly to determine if theres a clip-on attachment is designed to work with your hinge style. If so they will be able to direct you to the nearest distributor in your area. If you determine that the upgrade is not available there is an alternative discussed in the later part of this article. Presently the additional clip-on parts cost from three to six dollars per piece. Most average sized kitchens have about twenty five cupboard doors. Calculating one slow-close clip per door puts us in the neighborhood of one hundred and twenty dollars ($120) to upgrade a standard sized kitchen to have this feature throughout.