Door Hinges / October 11, 2018 / Yvette Guerette
Removing a door with a two hole hinge is going to require two helpers so you might want to be sure you have a friend their to hold the door for you as you begin unscrewing it. Another choice you are going to have is whether or not that you want a removable pin or a fixed pin. This is going to depend more on your needs. A removable pin is going to make it easy for you to take the door off the hinges without unscrewing the hinge from the door jamb. You can easily begin shopping online and looking at all of the different designs that there are for door hinges you might actually be amazed at the choices.
If you have a three hinge door you can easily undo a single hinge plate at a time. If you have doors with just two hinges youll need to place a wedge under the door to take the weight off the hinge before you loosen it. 2) Once the plate is removed dip a couple cardboard matches into wood or white glue and put them into the hole. Then tighten the hinge screws and they should hold. 3) If the thought of shoving matches into the holes doesnt work for you use a golf tee or a sliver of wood instead. Cover these with glue and reinstall the hinge. Dont put the screw in the repaired hole yet. Allow the glue to dry then cut off any excess wood and then drill a pilot hole into it.
These were large tapestries that were hanging in front of a big hole in the wall. They would block the entryway to a room and had to be pushed out of the way every time you wanted to go in or out. Going further back in time were large rocks that would have to be rolled in front of the door and then rolled away or pieces of wood that were pulled in front of the doorway and pushed back every time you wanted to go in and out. While it did the general job of a door it was a very inconvenient and very heavy way to go. These images illustrate why we should be thankful that someone finally came up with the great idea to make a more easy to use access to a room namely a door on door hinges.