Door Hinges / October 8, 2018 / Pauline Francoeur
What do begin to fail are the screws that hold the door hinges on the door and the frame. The stresses and strains of everyday openings begin to loosen the screws. This is particularly true on heavier doors that are either left open a lot or bear lots of traffic. At least twice a year you want to go through your entire home inspecting all the door hinges. If you find an loose screws simply tighten them with a screwdriver. If the screws in the door hinges spin in their place and wont tighten into the wood it means the holes are stripped. When this happens do the following: 1) Remove the screws on that particular hinge.
Its a fairly easy task to change the hinges on your door but it is somewhat time consuming. This is something that will dramatically change the look of your door and it is something that you definitely want to consider changing. Alright lets go over the different types of hinges that are available. Hinges have holes in them and they usually come in two different amounts of holes - two holes or three holes. The three hole hinges are going to increase the stability of the door. So if your door is heavy than you will want a three holed hinge over the two holed hinge.
This is just figuring the cost of the materials though. To have them installed by a cabinetry professional may cost an additional seventy five to one hundred and fifty dollars. If you cannot locate a soft close part to work with your existing hinges or you are not interested in switching out your hinges to be able to benefit from the new clip-on piece you can purchase a buffer shock absorber that attaches to the cabinet separate from the hinge. Some of these mechanisms get pressed into a hole that is drilled into the cupboard top or bottom. Other styles can be installed using screws. The purchase cost of these parts ranges from three to six dollars each. There will be only one slow-close part that needs to be installed per kitchen or bathroom cabinet door.