Door Hinges / October 4, 2018 / Laure Lacharite.
Theres no need to waste money on new hinges when you can maintain and reuse your current ones! Nobody likes squeaky doors. Door hinges should always be maintained at least a couple of times per year if you want them to function properly. Hinges have also changed quite a lot over the years and they now come in a very wide array of finishes and materials not just steel brass and iron. Screws are usually the ones that fail first but if you own quality door hinges they will most likely never require any maintenance since theyre designed to never rust or tarnish. Depending on the situation the screws can be stressed a lot and will surely require to be replaced sooner or later. If you notice that the door hinges show signs of aging you should start the maintaining process by changing the screws.
If you dont want your hinges to show you can go for concealed hinges pr if you want to leave a mark you can go for decorative ones. There is so much to choose from. Metals like brass and steel are ideal. You can pick and choose between black white and chrome to antique brass copper or even pewter. There are around fourteen finishes to choose from and make your home or office look custom made. You can start from shiny to dull and antique to smooth polish; a hinge with the perfect finish can sprinkle a dash of elegance to any room and bring the complete look to a culmination point.
This will keep the wood from cracking ensuring that the screw wont strip it again. A room is not a room without a door and door hinges. If there were no hinges you would have either a wall or a hole in the wall. Without door hinges there would never have been the song lyrics nobody knows what happens behind closed doors" because doors couldnt have closed in order for secret things to happen behind them. You must be thinking there had to be something that was used before the shift was made to what we today know as door hinges. You would be right. What was around before hinges was portiers.
You need to repeat this process a few times per year to ensure that everything is working properly. Start by checking for loose screws and change them where necessary. You can do this easily with a screwdriver. Sometimes we may also notice that the screws spin in place. This means that the screw holes are stripped and you will need to remove the screws. Simply dip a few matches inside the screw hole and the problem should now be gone. When dealing with creaks and squeaks you need to apply a couple of WD-40 squirts. Be sure to spray every joint so that it soaks in the middle.