Door Hinges / September 20, 2018 / Voleta Lemelin.
What do begin to fail are the screws that hold the door hinges on the door and the frame. The stresses and strains of everyday openings begin to loosen the screws. This is particularly true on heavier doors that are either left open a lot or bear lots of traffic. At least twice a year you want to go through your entire home inspecting all the door hinges. If you find an loose screws simply tighten them with a screwdriver. If the screws in the door hinges spin in their place and wont tighten into the wood it means the holes are stripped. When this happens do the following: 1) Remove the screws on that particular hinge.
Theres no need to waste money on new hinges when you can maintain and reuse your current ones! Nobody likes squeaky doors. Door hinges should always be maintained at least a couple of times per year if you want them to function properly. Hinges have also changed quite a lot over the years and they now come in a very wide array of finishes and materials not just steel brass and iron. Screws are usually the ones that fail first but if you own quality door hinges they will most likely never require any maintenance since theyre designed to never rust or tarnish. Depending on the situation the screws can be stressed a lot and will surely require to be replaced sooner or later. If you notice that the door hinges show signs of aging you should start the maintaining process by changing the screws.
For example you can get ones that are made from brass that have a lovely polished finish or others that are crafted out of bronze that feature an oil rubbed finish that is a deep maroon color perfect for a house that has more of an antique type look going on throughout it. Door hinges can be made from other materials as well including stainless steel copper and aluminum to name a few. Alone each is pretty pleasing to the eye but the different finishes that they have can make them even that much more beautiful. Some of those finishes include Venetian bronze satin nickel polished chrome burnished brass bright nickel dull chrome and a slew of others.
You need to repeat this process a few times per year to ensure that everything is working properly. Start by checking for loose screws and change them where necessary. You can do this easily with a screwdriver. Sometimes we may also notice that the screws spin in place. This means that the screw holes are stripped and you will need to remove the screws. Simply dip a few matches inside the screw hole and the problem should now be gone. When dealing with creaks and squeaks you need to apply a couple of WD-40 squirts. Be sure to spray every joint so that it soaks in the middle.