Door Threshold / September 18, 2018 / Pauline Francoeur
With the rough opening clean and prepped for the new door and jamb move the system into place as one with door hung on hinges. Temporarily shim the side jambs tight top and bottom ends in the rough opening. Temporary shims at the bottom hinge may also be required to straighten door sag. The top hinge will sag just be aware that you will compensate for it later with shims and a screw to snug it when the door is installed permanently. Use of a level isnt necessary just align the jambs flush with the interior plaster and shift shims to square the door in the jambs with even spacing reveal.
Doors can be protected with temporary cardboard door protectors available from a variety of manufacturers. Several protectors are not only made from recycled cardboard but can be reused and recycled entirely again making these protectors truly green. The first protector to market and most popular is DoorGuard. It is a truly green product that uses recycled cardboard for the door protection with natural rubber bands for attachment. Another popular protector is the 1-2-3 Doorshield product. This protector is not recyclable as it uses plastic Velcro for the door attachment.
3. SECURITY Most folding doors will feature a high security locking system but many still use face fixed or flag hinges that can pose a possible security issue and allow the hinges to be removed from the outside when the door is closed. Some upvc bifold doors may also use an exposed gearing system that is accessible from the outside of the door when the door is closed which can also pose a possible security threat. You can eliminate these potential security problems by ensuring you choose a folding door that has fully concealed gearing and hinge fixings.