Door Threshold / September 12, 2018 / Carine Auclair.
4. THRESHOLDS Although a flush threshold is the most popular option especially for internal bifold doors this may not always be practical in some cases and a conventional raised threshold will need to be used. It is important to note that the height of these can vary considerably with some upvc bifold door thresholds exceeding 125mm. Such a high step-over threshold may create an accessibility issue for children and the older generation. The latest bifold door designs offer raised thresholds designed to minimise the trip hazard with some offering thresholds as low as 50mm high.
During construction contractors will pass through the doorway with materials and equipment needed for the construction project. Each pass risks scratching or denting the home entryway. Temporary protection should be in place prior to the start of construction and should include protection for all the aspects of the entryway. Doors can be protected with temporary cardboard door protectors available from a variety of manufacturers. Several protectors are not only made from recycled cardboard but can be reused and recycled entirely again making these protectors truly green. The first protector to market and most popular is DoorGuard.
This protection screws into a wood subflooring to hold it in place and thus cannot be used on sliding doors installed over cement slabs which are commonly used on the west coast. Another option that does work for protecting sliding doors installed on cement slabs is impact-resistant U-board protection. It is a thick heavy weight compressed paper protection that is made from recycled material and is completely reusable. The U-board is placed over the tracks while the door is open and protects sliding door tracks from dirt and grime. As with the plastic protector the Sill Pro keeps the sliding tracks clean and protects the tracks of the door from damage that can interfere with the working operations of the door.
I believe installation direct to masonry is the height of challenge for an entry door where skills and patience for a carpenter are truly tested. You really only have one chance to get it right - screw hole mistakes in the cinderblock dont allow for incremental jambs adjustments. Here is where carpentry meets art you must think and be creative. So the satisfaction of a properly installed door in this case becomes at least for me a real thrill. On the initial site visit to measure up the door youre going to tap on the walls to see if they are drywall or plaster.