Door Threshold / September 12, 2018 / Carine Auclair.
Then re-assemble door system and re-shim into the indexed positions in the rough opening. At last now fasten jambs to the cinderblock with the masonry screws using shims at each screw location. Fine tune screw adjustments by wedging the shims to get the reveals around the door even. Adjust top and bottom jamb shims as necessary. Open and close door to check touching the weather stripping evenly top to bottom for any possible jambs twist. Some slight remaining jambs twist can be adjusted by persuading the jambs with a block and a hammer. Be careful. Now nail the shims permanently in position with a pneumatic nail gun shooting squarely into the cinderblock. Dont worry the nails should sink into the cinderblock as long as they are the proper length and are nailed squarely and firmly.
During construction contractors will pass through the doorway with materials and equipment needed for the construction project. Each pass risks scratching or denting the home entryway. Temporary protection should be in place prior to the start of construction and should include protection for all the aspects of the entryway. Doors can be protected with temporary cardboard door protectors available from a variety of manufacturers. Several protectors are not only made from recycled cardboard but can be reused and recycled entirely again making these protectors truly green. The first protector to market and most popular is DoorGuard.
Some manufacturers have now manufactured plastic covers to protect their exact thresholds dimensions and include the covers with the complete door unit. There are other pre-molded protectors available from online suppliers of temporary protection products. There are also a variety of tapes that can be used for threshold protection. Currently the best tape on the market T-X268 is a specialty tape that combines UV chemicals in both the tape and adhesive so it wont break down with ultra violet light. There are additional tapes available for sill protection as well including those made with blue polyvinylchloride.
Currently the best tape on the market T-X268 is a specialty tape that combines UV chemicals in both the tape and adhesive so it wont break down with ultra violet light. There are additional tapes available for sill protection as well including those made with blue polyvinylchloride. The cost to protecting doors jambs and thresholds are well worth the small investment. The average cost for a cardboard door protector one cardboard jamb protector and tape for the threshold is less than 25.00 The cost to replace just a door alone can range from several hundred dollars to several thousand dollars.