Door Threshold / September 12, 2018 / Carine Auclair.
Tightly wedged shims will allow you to operate the door carefully. Open and close to check the door touching the weather stripping evenly top to bottom for any possible jambs twist. Adjust as necessary even though jambs may not flush with plaster top to bottom. A good carpenter wont assume the original door was installed correctly right? Check the brickmold reveal you should have consistent and even measurements side to side and top to bottom. Its unusual to have brick out of plumb to any great extent. Adjust shims again as necessary. Index the jambs in the rough opening and the shims to jambs with pencil for reference when installing the system permanently. Remember you only have one chance to get this installation right so be patient - you will be rewarded with a satisfying outcome.
They are known to flake and chip when exposed to sunlight and are often cited for creating more work than the protection provided. These low quality 2 or 3 mil. tapes often leave a sticky adhesive residue on thresholds as the adhesive used in the tapes softens in warm temperatures. Another option is to use fitted threshold protection made from molded plastic. The molded plastic threshold protectors are designed to protect the most common types of thresholds in residential or commercial construction. They are the most durable type of threshold protection and can be used for multiple projects.
Currently the best tape on the market T-X268 is a specialty tape that combines UV chemicals in both the tape and adhesive so it wont break down with ultra violet light. There are additional tapes available for sill protection as well including those made with blue polyvinylchloride. The cost to protecting doors jambs and thresholds are well worth the small investment. The average cost for a cardboard door protector one cardboard jamb protector and tape for the threshold is less than 25.00 The cost to replace just a door alone can range from several hundred dollars to several thousand dollars.
During construction contractors will pass through the doorway with materials and equipment needed for the construction project. Each pass risks scratching or denting the home entryway. Temporary protection should be in place prior to the start of construction and should include protection for all the aspects of the entryway. Doors can be protected with temporary cardboard door protectors available from a variety of manufacturers. Several protectors are not only made from recycled cardboard but can be reused and recycled entirely again making these protectors truly green. The first protector to market and most popular is DoorGuard.