Door Hinges / October 11, 2018 / Yvette Guerette
But when door hinges become a bit unhinged from years of use they can not only cause doors to squeak stick or rub but allow heat to escape and cold to enter. Maintaining your door hinges is a simple process something you can do once or twice a year. And it will keep your hinges working properly for years to come. Unlike the old days when door hinges were made of iron brass or steel todays hinges come in an array of materials and finishes. Thanks to modern manufacturing techniques most of these finishes are maintenance free. Left alone they wont tarnish rust or fail over time.
If you have a three hinge door you can easily undo a single hinge plate at a time. If you have doors with just two hinges youll need to place a wedge under the door to take the weight off the hinge before you loosen it. 2) Once the plate is removed dip a couple cardboard matches into wood or white glue and put them into the hole. Then tighten the hinge screws and they should hold. 3) If the thought of shoving matches into the holes doesnt work for you use a golf tee or a sliver of wood instead. Cover these with glue and reinstall the hinge. Dont put the screw in the repaired hole yet. Allow the glue to dry then cut off any excess wood and then drill a pilot hole into it.
These were large tapestries that were hanging in front of a big hole in the wall. They would block the entryway to a room and had to be pushed out of the way every time you wanted to go in or out. Going further back in time were large rocks that would have to be rolled in front of the door and then rolled away or pieces of wood that were pulled in front of the doorway and pushed back every time you wanted to go in and out. While it did the general job of a door it was a very inconvenient and very heavy way to go. These images illustrate why we should be thankful that someone finally came up with the great idea to make a more easy to use access to a room namely a door on door hinges.