Door Hinges / October 11, 2018 / Yvette Guerette
You need to repeat this process a few times per year to ensure that everything is working properly. Start by checking for loose screws and change them where necessary. You can do this easily with a screwdriver. Sometimes we may also notice that the screws spin in place. This means that the screw holes are stripped and you will need to remove the screws. Simply dip a few matches inside the screw hole and the problem should now be gone. When dealing with creaks and squeaks you need to apply a couple of WD-40 squirts. Be sure to spray every joint so that it soaks in the middle.
Not only will this make your cabinet door hinge shopping experience easier but you will also complete you room with style and finesse. So even though they are small and you probably never thought about them being part of your décor dont forget about your cabinet door hinges because your modern life hinges on hinges. Door hinges are one of the most vital parts of home architecture yet they have been taken for granted by us. If it werent for hinges then opening your doors cabinets and car doors would become a hassle. Door hinges may have been invisible to you throughout your lifetime but after reading this article you might want to give them some serious thought.
If you have a three hinge door you can easily undo a single hinge plate at a time. If you have doors with just two hinges youll need to place a wedge under the door to take the weight off the hinge before you loosen it. 2) Once the plate is removed dip a couple cardboard matches into wood or white glue and put them into the hole. Then tighten the hinge screws and they should hold. 3) If the thought of shoving matches into the holes doesnt work for you use a golf tee or a sliver of wood instead. Cover these with glue and reinstall the hinge. Dont put the screw in the repaired hole yet. Allow the glue to dry then cut off any excess wood and then drill a pilot hole into it.