Door Threshold / September 15, 2018 / Leala Melanson
It is a truly green product that uses recycled cardboard for the door protection with natural rubber bands for attachment. Another popular protector is the 1-2-3 Doorshield product. This protector is not recyclable as it uses plastic Velcro for the door attachment. These large protectors are most often purchased in pallet quantities for use on many commercial projects however they are also available in smaller quantities as well. Doorjambs are quite often dented or scratched during construction. There are several types of protection available that snap onto the door casing and protect the jamb.
During construction contractors will pass through the doorway with materials and equipment needed for the construction project. Each pass risks scratching or denting the home entryway. Temporary protection should be in place prior to the start of construction and should include protection for all the aspects of the entryway. Doors can be protected with temporary cardboard door protectors available from a variety of manufacturers. Several protectors are not only made from recycled cardboard but can be reused and recycled entirely again making these protectors truly green. The first protector to market and most popular is DoorGuard.
Ive learned by the hard way of experience that its necessary to remove old existing jambs carefully. If directly fastened to masonry with cut nails jambs removal may break out the cinderblock unless the jambs are cut into short manageable lengths. An out of level concrete threshold step can be ground flat by a concrete cutting subcontractor or the door threshold can be adjusted by unscrewing and repositioning in the jamb by the amount out of level. Any attached brickmold and casing must be removed from the jambs to make installation easier with shimming. Also brickmold will probably have to be ripped in width to fit the overall brick opening width and height.