Door Hinges / September 29, 2018 / Talon Gregoire
Too weak of hinges and youll always be straightening the door. This can become maddening very quickly. If you have concealed hinges and want to move to surface mounted cabinet hinges chances are good that youll want to go with either semi-concealed hinges where only the frame wing is visible (the door part goes on the back side of the cabinet door) overlay hinges or inset hinges. It just depends on the type cabinet doors you have. One good hint: Before you redo all your hinges buy several different styles and finishes and put them on them in various parts of the kitchen.
If you have a three hinge door you can easily undo a single hinge plate at a time. If you have doors with just two hinges youll need to place a wedge under the door to take the weight off the hinge before you loosen it. 2) Once the plate is removed dip a couple cardboard matches into wood or white glue and put them into the hole. Then tighten the hinge screws and they should hold. 3) If the thought of shoving matches into the holes doesnt work for you use a golf tee or a sliver of wood instead. Cover these with glue and reinstall the hinge. Dont put the screw in the repaired hole yet. Allow the glue to dry then cut off any excess wood and then drill a pilot hole into it.
What do begin to fail are the screws that hold the door hinges on the door and the frame. The stresses and strains of everyday openings begin to loosen the screws. This is particularly true on heavier doors that are either left open a lot or bear lots of traffic. At least twice a year you want to go through your entire home inspecting all the door hinges. If you find an loose screws simply tighten them with a screwdriver. If the screws in the door hinges spin in their place and wont tighten into the wood it means the holes are stripped. When this happens do the following: 1) Remove the screws on that particular hinge.