Door Hinges / September 29, 2018 / Talon Gregoire
If you have a three hinge door you can easily undo a single hinge plate at a time. If you have doors with just two hinges youll need to place a wedge under the door to take the weight off the hinge before you loosen it. 2) Once the plate is removed dip a couple cardboard matches into wood or white glue and put them into the hole. Then tighten the hinge screws and they should hold. 3) If the thought of shoving matches into the holes doesnt work for you use a golf tee or a sliver of wood instead. Cover these with glue and reinstall the hinge. Dont put the screw in the repaired hole yet. Allow the glue to dry then cut off any excess wood and then drill a pilot hole into it.
The pin can be outfitted with balls or finials for a decorative touch. Similar to the butt hinge but used only on flush doors; doors that rest within the frame are butterfly hinges. These cabinet door hinges are also constructed with two flaps with screw holes held together by a pin. The difference is these hinges are mounted on the outside of the door and frame giving your cabinet a decorative touch. They are available in several styles to suit your taste ranging from colonial to art deco and more. Pivot hinges are made for overlay doors which are doors that rest over the door frame.
The new slow-close attachments only need to be added to one hinge per cabinet door unless you have large pantry doors. In such cases it is advisable to install two units per door. They will not work on just any European hinge though. You must have the correct straight-arm hinge brand and model number in order to be able to add the attachment to them. The hydraulic apparatus is sold as a separate piece from the hinge and clips on after the doors have been completely adjusted. To determine if the clip-on accessory is available for your existing hinge brand remove a hinge from your cupboard door and visit your local cupboard manufacturing supply company.