Door Hinges / October 9, 2018 / Talon Gregoire
Alternatively if you can identify the brand name and model number of your hinge you can contact the manufacture directly to determine if theres a clip-on attachment is designed to work with your hinge style. If so they will be able to direct you to the nearest distributor in your area. If you determine that the upgrade is not available there is an alternative discussed in the later part of this article. Presently the additional clip-on parts cost from three to six dollars per piece. Most average sized kitchens have about twenty five cupboard doors. Calculating one slow-close clip per door puts us in the neighborhood of one hundred and twenty dollars ($120) to upgrade a standard sized kitchen to have this feature throughout.
The new slow-close attachments only need to be added to one hinge per cabinet door unless you have large pantry doors. In such cases it is advisable to install two units per door. They will not work on just any European hinge though. You must have the correct straight-arm hinge brand and model number in order to be able to add the attachment to them. The hydraulic apparatus is sold as a separate piece from the hinge and clips on after the doors have been completely adjusted. To determine if the clip-on accessory is available for your existing hinge brand remove a hinge from your cupboard door and visit your local cupboard manufacturing supply company.
You need to repeat this process a few times per year to ensure that everything is working properly. Start by checking for loose screws and change them where necessary. You can do this easily with a screwdriver. Sometimes we may also notice that the screws spin in place. This means that the screw holes are stripped and you will need to remove the screws. Simply dip a few matches inside the screw hole and the problem should now be gone. When dealing with creaks and squeaks you need to apply a couple of WD-40 squirts. Be sure to spray every joint so that it soaks in the middle.