Door Hinges / September 28, 2018 / Pauline Francoeur
If you have a three hinge door you can easily undo a single hinge plate at a time. If you have doors with just two hinges youll need to place a wedge under the door to take the weight off the hinge before you loosen it. 2) Once the plate is removed dip a couple cardboard matches into wood or white glue and put them into the hole. Then tighten the hinge screws and they should hold. 3) If the thought of shoving matches into the holes doesnt work for you use a golf tee or a sliver of wood instead. Cover these with glue and reinstall the hinge. Dont put the screw in the repaired hole yet. Allow the glue to dry then cut off any excess wood and then drill a pilot hole into it.
Too weak of hinges and youll always be straightening the door. This can become maddening very quickly. If you have concealed hinges and want to move to surface mounted cabinet hinges chances are good that youll want to go with either semi-concealed hinges where only the frame wing is visible (the door part goes on the back side of the cabinet door) overlay hinges or inset hinges. It just depends on the type cabinet doors you have. One good hint: Before you redo all your hinges buy several different styles and finishes and put them on them in various parts of the kitchen.
Its a fairly easy task to change the hinges on your door but it is somewhat time consuming. This is something that will dramatically change the look of your door and it is something that you definitely want to consider changing. Alright lets go over the different types of hinges that are available. Hinges have holes in them and they usually come in two different amounts of holes - two holes or three holes. The three hole hinges are going to increase the stability of the door. So if your door is heavy than you will want a three holed hinge over the two holed hinge.