Door Hinges / October 11, 2018 / Yvette Guerette
What do begin to fail are the screws that hold the door hinges on the door and the frame. The stresses and strains of everyday openings begin to loosen the screws. This is particularly true on heavier doors that are either left open a lot or bear lots of traffic. At least twice a year you want to go through your entire home inspecting all the door hinges. If you find an loose screws simply tighten them with a screwdriver. If the screws in the door hinges spin in their place and wont tighten into the wood it means the holes are stripped. When this happens do the following: 1) Remove the screws on that particular hinge.
You can use cooking oil for the same purpose as well if you dont have any WD-40 but this wont solve the problem for long! WD-40 is available in a lot of countries at the moment and it can be found just about anywhere such as hardware grocery or convenience stores. As you can see door hinges are very easy to maintain and the process doesnt require a lot of your time! Door hinges have a thankless job. For most of their mundane lives they simply swing back and forth holding the door securely in its frame. Occasionally they strain as children swing back and forth on the door handles. Other times they shudder to a sudden stop as a door is thoughtlessly slammed.
The new slow-close attachments only need to be added to one hinge per cabinet door unless you have large pantry doors. In such cases it is advisable to install two units per door. They will not work on just any European hinge though. You must have the correct straight-arm hinge brand and model number in order to be able to add the attachment to them. The hydraulic apparatus is sold as a separate piece from the hinge and clips on after the doors have been completely adjusted. To determine if the clip-on accessory is available for your existing hinge brand remove a hinge from your cupboard door and visit your local cupboard manufacturing supply company.