Door Hinges / October 11, 2018 / Yvette Guerette
You need to repeat this process a few times per year to ensure that everything is working properly. Start by checking for loose screws and change them where necessary. You can do this easily with a screwdriver. Sometimes we may also notice that the screws spin in place. This means that the screw holes are stripped and you will need to remove the screws. Simply dip a few matches inside the screw hole and the problem should now be gone. When dealing with creaks and squeaks you need to apply a couple of WD-40 squirts. Be sure to spray every joint so that it soaks in the middle.
Selecting The Proper Door Hinges Now that you appreciate the invention of door hinges you need to make sure you have the right ones at work in your home. First make sure you have enough to do the job that needs to be done on your door. For the most part you will be able to choose between 2 or 3 door hinges on most doors. In some cases the door will come with the set number of hinges. In other cases you should think about the weight of the door before deciding on the number of hinges that should be used. While wood doors are generally able to be held with two hinges (unless they are very heavy wood or oversized door) if you have a steel door you need to make sure the hinges are strong enough to hold it.
What do begin to fail are the screws that hold the door hinges on the door and the frame. The stresses and strains of everyday openings begin to loosen the screws. This is particularly true on heavier doors that are either left open a lot or bear lots of traffic. At least twice a year you want to go through your entire home inspecting all the door hinges. If you find an loose screws simply tighten them with a screwdriver. If the screws in the door hinges spin in their place and wont tighten into the wood it means the holes are stripped. When this happens do the following: 1) Remove the screws on that particular hinge.