Door Hinges / October 4, 2018 / Laure Lacharite
You need to repeat this process a few times per year to ensure that everything is working properly. Start by checking for loose screws and change them where necessary. You can do this easily with a screwdriver. Sometimes we may also notice that the screws spin in place. This means that the screw holes are stripped and you will need to remove the screws. Simply dip a few matches inside the screw hole and the problem should now be gone. When dealing with creaks and squeaks you need to apply a couple of WD-40 squirts. Be sure to spray every joint so that it soaks in the middle.
But when door hinges become a bit unhinged from years of use they can not only cause doors to squeak stick or rub but allow heat to escape and cold to enter. Maintaining your door hinges is a simple process something you can do once or twice a year. And it will keep your hinges working properly for years to come. Unlike the old days when door hinges were made of iron brass or steel todays hinges come in an array of materials and finishes. Thanks to modern manufacturing techniques most of these finishes are maintenance free. Left alone they wont tarnish rust or fail over time.
If you have a three hinge door you can easily undo a single hinge plate at a time. If you have doors with just two hinges youll need to place a wedge under the door to take the weight off the hinge before you loosen it. 2) Once the plate is removed dip a couple cardboard matches into wood or white glue and put them into the hole. Then tighten the hinge screws and they should hold. 3) If the thought of shoving matches into the holes doesnt work for you use a golf tee or a sliver of wood instead. Cover these with glue and reinstall the hinge. Dont put the screw in the repaired hole yet. Allow the glue to dry then cut off any excess wood and then drill a pilot hole into it.