Door Hinges / October 11, 2018 / Yvette Guerette
You need to repeat this process a few times per year to ensure that everything is working properly. Start by checking for loose screws and change them where necessary. You can do this easily with a screwdriver. Sometimes we may also notice that the screws spin in place. This means that the screw holes are stripped and you will need to remove the screws. Simply dip a few matches inside the screw hole and the problem should now be gone. When dealing with creaks and squeaks you need to apply a couple of WD-40 squirts. Be sure to spray every joint so that it soaks in the middle.
This is just figuring the cost of the materials though. To have them installed by a cabinetry professional may cost an additional seventy five to one hundred and fifty dollars. If you cannot locate a soft close part to work with your existing hinges or you are not interested in switching out your hinges to be able to benefit from the new clip-on piece you can purchase a buffer shock absorber that attaches to the cabinet separate from the hinge. Some of these mechanisms get pressed into a hole that is drilled into the cupboard top or bottom. Other styles can be installed using screws. The purchase cost of these parts ranges from three to six dollars each. There will be only one slow-close part that needs to be installed per kitchen or bathroom cabinet door.
What do begin to fail are the screws that hold the door hinges on the door and the frame. The stresses and strains of everyday openings begin to loosen the screws. This is particularly true on heavier doors that are either left open a lot or bear lots of traffic. At least twice a year you want to go through your entire home inspecting all the door hinges. If you find an loose screws simply tighten them with a screwdriver. If the screws in the door hinges spin in their place and wont tighten into the wood it means the holes are stripped. When this happens do the following: 1) Remove the screws on that particular hinge.