Door Hinges / October 11, 2018 / Yvette Guerette
If you have a three hinge door you can easily undo a single hinge plate at a time. If you have doors with just two hinges youll need to place a wedge under the door to take the weight off the hinge before you loosen it. 2) Once the plate is removed dip a couple cardboard matches into wood or white glue and put them into the hole. Then tighten the hinge screws and they should hold. 3) If the thought of shoving matches into the holes doesnt work for you use a golf tee or a sliver of wood instead. Cover these with glue and reinstall the hinge. Dont put the screw in the repaired hole yet. Allow the glue to dry then cut off any excess wood and then drill a pilot hole into it.
For example you can get ones that are made from brass that have a lovely polished finish or others that are crafted out of bronze that feature an oil rubbed finish that is a deep maroon color perfect for a house that has more of an antique type look going on throughout it. Door hinges can be made from other materials as well including stainless steel copper and aluminum to name a few. Alone each is pretty pleasing to the eye but the different finishes that they have can make them even that much more beautiful. Some of those finishes include Venetian bronze satin nickel polished chrome burnished brass bright nickel dull chrome and a slew of others.
What do begin to fail are the screws that hold the door hinges on the door and the frame. The stresses and strains of everyday openings begin to loosen the screws. This is particularly true on heavier doors that are either left open a lot or bear lots of traffic. At least twice a year you want to go through your entire home inspecting all the door hinges. If you find an loose screws simply tighten them with a screwdriver. If the screws in the door hinges spin in their place and wont tighten into the wood it means the holes are stripped. When this happens do the following: 1) Remove the screws on that particular hinge.