Door Hinges / October 11, 2018 / Yvette Guerette
What do begin to fail are the screws that hold the door hinges on the door and the frame. The stresses and strains of everyday openings begin to loosen the screws. This is particularly true on heavier doors that are either left open a lot or bear lots of traffic. At least twice a year you want to go through your entire home inspecting all the door hinges. If you find an loose screws simply tighten them with a screwdriver. If the screws in the door hinges spin in their place and wont tighten into the wood it means the holes are stripped. When this happens do the following: 1) Remove the screws on that particular hinge.
Removing a door with a two hole hinge is going to require two helpers so you might want to be sure you have a friend their to hold the door for you as you begin unscrewing it. Another choice you are going to have is whether or not that you want a removable pin or a fixed pin. This is going to depend more on your needs. A removable pin is going to make it easy for you to take the door off the hinges without unscrewing the hinge from the door jamb. You can easily begin shopping online and looking at all of the different designs that there are for door hinges you might actually be amazed at the choices.
But when door hinges become a bit unhinged from years of use they can not only cause doors to squeak stick or rub but allow heat to escape and cold to enter. Maintaining your door hinges is a simple process something you can do once or twice a year. And it will keep your hinges working properly for years to come. Unlike the old days when door hinges were made of iron brass or steel todays hinges come in an array of materials and finishes. Thanks to modern manufacturing techniques most of these finishes are maintenance free. Left alone they wont tarnish rust or fail over time.