Door Hinges / October 6, 2018 / Marphisa Duffet
Removing a door with a two hole hinge is going to require two helpers so you might want to be sure you have a friend their to hold the door for you as you begin unscrewing it. Another choice you are going to have is whether or not that you want a removable pin or a fixed pin. This is going to depend more on your needs. A removable pin is going to make it easy for you to take the door off the hinges without unscrewing the hinge from the door jamb. You can easily begin shopping online and looking at all of the different designs that there are for door hinges you might actually be amazed at the choices.
The new slow-close attachments only need to be added to one hinge per cabinet door unless you have large pantry doors. In such cases it is advisable to install two units per door. They will not work on just any European hinge though. You must have the correct straight-arm hinge brand and model number in order to be able to add the attachment to them. The hydraulic apparatus is sold as a separate piece from the hinge and clips on after the doors have been completely adjusted. To determine if the clip-on accessory is available for your existing hinge brand remove a hinge from your cupboard door and visit your local cupboard manufacturing supply company.
Theres no need to waste money on new hinges when you can maintain and reuse your current ones! Nobody likes squeaky doors. Door hinges should always be maintained at least a couple of times per year if you want them to function properly. Hinges have also changed quite a lot over the years and they now come in a very wide array of finishes and materials not just steel brass and iron. Screws are usually the ones that fail first but if you own quality door hinges they will most likely never require any maintenance since theyre designed to never rust or tarnish. Depending on the situation the screws can be stressed a lot and will surely require to be replaced sooner or later. If you notice that the door hinges show signs of aging you should start the maintaining process by changing the screws.