Door Hinges / September 28, 2018 / Pauline Francoeur
The pin can be outfitted with balls or finials for a decorative touch. Similar to the butt hinge but used only on flush doors; doors that rest within the frame are butterfly hinges. These cabinet door hinges are also constructed with two flaps with screw holes held together by a pin. The difference is these hinges are mounted on the outside of the door and frame giving your cabinet a decorative touch. They are available in several styles to suit your taste ranging from colonial to art deco and more. Pivot hinges are made for overlay doors which are doors that rest over the door frame.
But when door hinges become a bit unhinged from years of use they can not only cause doors to squeak stick or rub but allow heat to escape and cold to enter. Maintaining your door hinges is a simple process something you can do once or twice a year. And it will keep your hinges working properly for years to come. Unlike the old days when door hinges were made of iron brass or steel todays hinges come in an array of materials and finishes. Thanks to modern manufacturing techniques most of these finishes are maintenance free. Left alone they wont tarnish rust or fail over time.
You need to repeat this process a few times per year to ensure that everything is working properly. Start by checking for loose screws and change them where necessary. You can do this easily with a screwdriver. Sometimes we may also notice that the screws spin in place. This means that the screw holes are stripped and you will need to remove the screws. Simply dip a few matches inside the screw hole and the problem should now be gone. When dealing with creaks and squeaks you need to apply a couple of WD-40 squirts. Be sure to spray every joint so that it soaks in the middle.