Door Hinges / September 28, 2018 / Pauline Francoeur
What do begin to fail are the screws that hold the door hinges on the door and the frame. The stresses and strains of everyday openings begin to loosen the screws. This is particularly true on heavier doors that are either left open a lot or bear lots of traffic. At least twice a year you want to go through your entire home inspecting all the door hinges. If you find an loose screws simply tighten them with a screwdriver. If the screws in the door hinges spin in their place and wont tighten into the wood it means the holes are stripped. When this happens do the following: 1) Remove the screws on that particular hinge.
Its a fairly easy task to change the hinges on your door but it is somewhat time consuming. This is something that will dramatically change the look of your door and it is something that you definitely want to consider changing. Alright lets go over the different types of hinges that are available. Hinges have holes in them and they usually come in two different amounts of holes - two holes or three holes. The three hole hinges are going to increase the stability of the door. So if your door is heavy than you will want a three holed hinge over the two holed hinge.
Alternatively if you can identify the brand name and model number of your hinge you can contact the manufacture directly to determine if theres a clip-on attachment is designed to work with your hinge style. If so they will be able to direct you to the nearest distributor in your area. If you determine that the upgrade is not available there is an alternative discussed in the later part of this article. Presently the additional clip-on parts cost from three to six dollars per piece. Most average sized kitchens have about twenty five cupboard doors. Calculating one slow-close clip per door puts us in the neighborhood of one hundred and twenty dollars ($120) to upgrade a standard sized kitchen to have this feature throughout.